Loading ...
Loading ...
Loading ...
1110
In order for your new appliance to work properly, it is important
that you understand its various features, controls, and how to
use them.
Power On/Off Switch (Power Interruption Switch)
The power on/off switch is located behind the top grille. It is
used to turn the power off when cleaning. Your appliance arrives
from the factory with the power interruption switch on.
To turn power off, remove the center grille blade. Press the
power on/off switch to the off position.
To turn power on, press power on/off switch to the on position.
Replace the center grille blade.
IMPORTANT: Be sure the power on/off switch is in the on
position after cleaning
Showroom Mode Initiation
Showroom mode allows electronic controls and interior lights to
function independently of refrigeraton system.
To enter the showroom mode: Press and hold ”ACTIVATE
CONTROLS” pad; while holding, press and hold the “HIGHER”
and “ALARM OFF” pads together for 3 seconds. Three beeps
will sound and SHOW will be lit. Showroom mode is entered.
To exit the showroom mode: press and hold “ACTIVATE
CONTROLS” pad; while holding, press and hold the “HIGHER”
and “ALARM OFF” pads together. Three beeps will sound and
control will revert to normal operation and display.
Product Controls
Power
Switch
Settings and Functions
Product Controls
Settings and Functions
Electronic Temperature Settings
The electronic controls are located behind the door above the
cabinet interior. To activate the electronic control panel, press
“ACTIVATE CONTROLS” pad. All other pads, except the
“ALARM OFF” pad, will remain inactive until the ”ACTIVATE
CONTROLS” pad is pressed. Once activated, pad remains
programmable for at least ten minutes.
When you first plug your new appliance in, you will find that
the refrigerator factory setting is 38° F and the freezer factory
setting is 0° F. Wait 24 hours after plug-in to reach this
setting. After 24 hours, you may adjust controls as desired.
To change from °F to °C, press and hold “ACTIVATE
CONTROLS” then press and hold “ALARM OFF” for 3
seconds. To change back, follow the same steps.
To adjust the refrigerator or freezer temperature, simply press
the ”ACTIVATE CONTROLS” pad, then “REF TEMP” pad or
“FRZ TEMP” pad. Press the “HIGHER” or “LOWER” pad to
adjust temperature setting one degree at a time.
NOTE: Allow 24 hours for temperature to reach desired
setting after any change in set temperature.
Entry Tone
The entry tone is the “beep” you will hear when you press the
control pad. You can deactivate the entry tone by pressing
and holding the ”ACTIVATE CONTROLS” pad for three to
five seconds. You will hear three short beeps to let you know
that the entry tone feature has been deactivated.
To activate the entry tone, simply press and hold the
”ACTIVATE CONTROLS” pad for three to five seconds.
Fast Cool (All Refrigerator)
Fast Cool runs the compressor at high speed for 2 hours to
cool the refrigerator as quickly as possible. After 2 hours, the
refrigerator will return to the previous setting.
To activate fast cool, press ”ACTIVATE CONTROLS” followed
by the “FAST COOL” pad. The fast cool light will be lit.
Max Refrigerator Mode (All Refrigerator)
Max refrigerator mode adjusts the refrigerator temperature to
the coldest setting for four hours, at the end of which the
refrigerator's temperature automatically returns to its previous
setting.
FREEZERFREEZER
MAX FRZMAX FRZ MAX REFMAX REF
F
FAST COOLFAST COOL
SAB SHOWSAB SHOW
REFRIGERATORREFRIGERATOR
DOOR OPENDOOR OPEN
POWERPOWER
HIGH TEMPHIGH TEMP
C
Loading ...
Loading ...
Loading ...