Loading ...
Loading ...
Loading ...
1918
Operation
Operation
All Freezer
Wire Shelf Adjustment
You can easily adjust your freezer's
shelves. To remove a shelf, simply tilt
it up at the front, releasing the hooks
from the shelf support. Then, pull the
shelf straight out. To replace, guide
the rear hooks of the shelf into the
slots in the shelf supports. Then, tilt
the shelf up at the front until the
hooks drop into the slots. Next,
lower the front of the shelf to a level
position.
Wire Basket Adjustment
You can easily adjust your freezer's
wire baskets by moving the dividers.
To remove a divider, simply grasp it in
the center, and pull the divider
straight up. To replace, guide the
divider around the basket wires in the
desired location, then push the
divider down until it
stops.
Automatic Ice Maker
(All Freezer)
The ice maker and slide-out ice drawer on
your refrigerator are not adjustable, but the
ice drawer slides forward for easy access to
ice.
After the freezer reaches normal
temperature, the ice maker fills with water
and begins operating. Under normal
conditions, the ice maker will produce
seven to nine batches of ice per 24 hour
period.
NOTE: Allow 24 to 48 hours after installation before looking
for ice in your ice drawer. You should discard the first three
full drawers of ice and should also throw out the first drawer
full of ice after extended periods of non-use.
During ice production, the ice maker arm raises and lowers.
When the ice bin is full, the ice maker arm automatically turns
the ice maker off. To manually stop ice production, raise the
ice maker arm. You will hear a definite click when you have
the arm in the right position. The ice maker won't produce
any more ice until you lower the ice maker arm.
CAUTION
To avoid damage to ice maker, observe the following:
• Do not force ice maker arm down or up past stop position.
• Do not place or store anything in ice bucket.
Off
Position
On
Position
Ice
Maker
Arm
Door Bin Adjustment
Your appliance’s door bins hold
two-liter bottles and can be placed
in any position on the refrigerator
door. To remove a bin, simply
grasp it, lift the bin up, and pull it
out.
To replace the bin, place it over
the glides in the door, and push
the door bin down to lock it into
place.
1
2
Loading ...
Loading ...
Loading ...