Loading ...
Loading ...
Loading ...
20
MANUAL (ROTARY) CONTROLS –
MANUAL MODELS
USING YOUR APPLIANCE
• Adjusting the refrigerator temperature – bottom
mount freezer (BM) model
1. Select the refrigerator control (top knob).
2. Rotate the knob clockwise to set colder.
3. Rotate the knob anti-clockwise to set less cold.
• Adjusting the freezer temperature – bottom
mount freezer (BM) model
1. Select the freezer control (bottom knob).
2. Rotate the knob clockwise to set colder.
3. Rotate the knob anti-clockwise to set less cold.
• Adjusting the all refrigerator temperature
– single door all refrigerator (AR) built-in
refrigerator models
1. Rotate the knob clockwise to set colder.
2. Rotate the knob anti-clockwise to set less cold.
• Adjusting the all freezer temperature – single
door all freezer (AF) and built-in freezer model
1. Rotate the knob clockwise to set colder.
2. Rotate the knob anti-clockwise to set less cold.
Colder
Mid
Less Cold
Crisper bin
Use the crisper bin to store vegetables, fruit or small goods.
Change the humidity by sliding or rotating the humidity
control.
Humidity control
• Storing vegetables
Store vegetables in the crisper bin and remember to
set the humidity control to more humid (closed).
• Storing fruit & small goods
Store fruit and small goods in the crisper bin and
remember to set the humidity control to less
humid (open).
• Removal (standard Crisper Bins)
1. Empty food from the drawer.
2. Remove the crisper bin(s) by pulling forward, then up
and forward again.
3. Remove the crisper shelf by lifting the catches on the
underside of the shelf and pulling the shelf forward.
Catch
• Removal (on telescopic extension slides)
Remove the crisper bin(s) by pulling forward, then up
and forward again, lifting the bin off the slides. Push
the slides back into the refrigerator.
WARNING!
Never close the door while the telescopic slides are extended.
It may damage the slide and/or the refrigerator or cause the
slide to become disengaged from the refrigerator.
WARNING!
To clean a crisper cover with telescopic extension slides,
simply wipe with a damp cloth and warm soapy water. Never
immerse the cover in water, as this could affect the operation
of the slide.
• To refit (see diagram on next page)
1. With the runners pushed in all the way.
2. Slide the bin into place over the telescopic slides and
under the shelf. Push the bin in until it stops, noting
that the bin will not be closed all the way.
3. Open the bin to access the finger tabs at the ends on
each side of the bin. Use your thumb and forefinger to
lift the bin over the end of the slide
and clip in place.
4. Fully close the bin.
Loading ...
Loading ...
Loading ...