Loading ...
Loading ...
Loading ...
Use
87
EN
Retracting the handle manually
If the handle is extended, press the
“SMEG” logo again on the “home screen”
to retract it.
Operation during a function
The handle extends automatically as soon
as the appliance starts.
The handle will remain in the extended
position for the duration of the function and
the cooling time.
Handle obstruction
If there is an obstruction in the area of
operation of the handle when it is
extending/retracting, the appliance will
make several attempts to extend/retract it.
Automatic recalibration
In order to keep the door and the front
panel aligned, after the handle has
extended / retracted several times, it will
perform an automatic recalibration
procedure.
During recalibration, the appliance will
carry out some extension / retraction cycles
to determine the best alignment position.
If the door is open, the handle will
be remain in the extended position.
The handle retracts automatically
only after the oven has cooled
down.
It is not possible to use the manual
control to retract the handle while
the appliance is in operation or
cooling down.
Remove the obstruction
immediately to allow the handle to
operate correctly.
This does not indicate a fault, it is
part of the normal operation of the
appliance.
Loading ...
Loading ...
Loading ...