Loading ...
Loading ...
Loading ...
17
Figure 4
Oven door
Hinge
Figure 3
Around
GENERAL CARE & CLEANING
REMOVING AND REPLACING THE OVEN
DOOR (HINGE B)
Figure 2
Figure 5
CAUTION
The door is heavy. For safe, temporary storage, lay the
door at with the inside of the door facing down.
To Remove Oven Door:
1. Open oven door completely (horizontal with oor - See
Fig. 1).
2. Pull the door hinge locks on both left and right
door hinges down from the oven frame completely
towards the oven door (See Fig. 2). A tool such as a
small at-blade screwdriver may be required.
3. Firmly grasp both sides of oven door along the door
sides (Do not use the oven door handle - See Fig. 3).
4. Close the door to the broil stop position (the oven
door will stop into this position just before fully
closing).
5. With the oven door in the broil stop position, lift the
oven door hinge arms over the roller pins located on
each side of the oven frame (See Fig. 4).
To Replace Oven Door:
1. Firmly grasp both sides of oven door along the door
sides (Do not use the oven door handle - See Fig. 3).
2. Holding the oven door at the same angle as the
removal position, seat the hook of the hinge arm over
the roller pins located on each side of the oven door
frame (See Fig. 4). The hook of the hinge arms must
be fully seated onto the roller pins.
3. Fully open the oven door (horizontal with oor - See
Fig. 1).
4. Push the door hinge locks up towards and into the
oven frame on both left and right oven door hinges
(See Fig. 2) to the locked position.
5. Close the oven door.
Door hinge locations with
oven door fully open -
Figure 1
Special Door Care Instructions
Most oven doors contain glass that can break.
Read the following recommendations:
1. Do not close the oven door until all the oven racks
are fully in place.
2. Do not hit the glass with pots, pans, or any other
object.
3. Scratching, hitting, jarring or stressing the glass may
weaken its structure causing an increased risk of
breakage at a later time.
CHANGING THE OVEN LIGHT
On some models an interior oven light will turn
automatically when the oven door is opened. The oven
light may be turned on when the door is closed by
pushing the knob located on the control panel. On some
models, the lamp is covered with a glass shield held in
place by a wire holder. THE GLASS SHIELD MUST BE
IN PLACE WHENEVER THE OVEN IS IN USE.
To replace the light bulb:
CAUTION: BE SURE THE OVEN IS COOL.
1. Turn the power off at the main source.
2. Wear a leather-faced glove for protection against
possible broken glass.
3. Replace bulb with 40-watt appliance bulb only.
4. For models with glass
shield, press holder
on one side to release
glass shield, change
bulb and be sure to
replace the glass
shield.
Roller
pin
Hinge
arm
hook
Loading ...
Loading ...
Loading ...