Loading ...
Loading ...
Loading ...
14
To avoid possible
burns use care when opening the
oven door after the Self-Cleaning
cycle. Stand to the side of the
oven when opening the door to
allow hot air or steam to escape.
DO NOT force the
oven door open. This can damage
the automatic door locking
system. Use caution and avoid
possible burns when opening the
door after the Self-Cleaning cycle
has completed. The oven may
still be VERY HOT.
STARTING THE SELECT SELF-CLEAN CYCLE
For satisfactory results, use a 2 hour Self-Clean cycle for light soils or a 3
hour cycle for average to heavy soils. NOTE: The kitchen area should be
well ventilated using an open window, ventilation fan or exhaust hood during
the 1st Self-Clean cycle. This will help eliminate the normal odors associated
with the 1st Self-Clean cycle.
To Set the Controls for a Self-Clean Cycle:
1. Be sure the clock shows the correct time of day.
2. Press CLEAN. "— — —" appears in the display.
3. Press the until "3:00" appears in the display for a 3 hour cycle, or press
until "2:00" appears in the display for a 2 hour cycle.
4. As soon as or is released, "CLn" appears in the display.
5. As soon as the controls are set, the motor driven lock will begin to close
automatically and the "Door Locked" indicator light will ash. DO NOT
open the oven door while the light is ashing (it takes about 15 seconds
for the oven door to lock).
6. The "LOCK" light will glow until the Self-Cleaning cycle is complete or
cancelled and the oven temperature has cooled.
When the Self-Clean Cycle is Completed:
1. The time of day or "End" will appear in the display window and the
"Clean" and "LOCK" light will continue to glow.
2. Once the oven has cooled down for about 1 HOUR and the "LOCK" light
has gone out, the oven door can be opened.
3. If "End" is in the display and the Select Clean indicator light remains ON,
press CLEAR OFF. The time of day will appear in the display.
NOTE: When the oven is cool, wipe away any residue or powdered ash with a
damp cloth or paper towel.
Stopping or Interrupting a Select Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a Self-Cleaning cycle:
1. Press CLEAR OFF.
2. Once the oven has cooled down for about 1 HOUR and the "LOCK" light
has gone out, the oven door can be opened.
3. Restart the Self-Clean cycle once all conditions have been corrected.
SETTING OVEN CONTROLS
Loading ...
Loading ...
Loading ...