Loading ...
Loading ...
Loading ...
27
� To raise the drawer front, turn adjusting screw clockwise.
� To lower the drawer front, turn adjusting screw
counterclockwise.
Right-Hand Side Drawer Glide
� To raise the drawer front, turn adjusting screw
counterclockwise.
� To lower the drawer front, turn adjusting screw clockwise.
6. Insert the Phillips screwdriver into tightening screw, and turn
clockwise to tighten the drawer front.
7. Close the refrigerated drawer to check the alignment. Repeat
steps 2 through 6 until the drawer fronts are level.
Step 2 - Adjust the Drawer Fronts Side to Side
IMPORTANT: Each refrigerated drawer can be adjusted side to
side on both the left and right side.
1. With the drawers closed, identify the drawer that is not
aligned.
2. Open the drawer to its full extension, and remove the interior
bin.
3. Locate the drawer glide brackets.
4. Starting with the glide bracket closest to the vertical gap, press
and hold the release lever up. With your other hand, lift the
door clip from the drawer glide bracket.
A. Drawer front clip C. Release lever
B. Drawer glide bracket
5. Reposition the drawer front clip onto the drawer glide bracket
in the direction you want to move the drawer front. Make sure
that the glide bracket is vertically level.
6. Release the lever to lock the glide bracket into position.
7. Repeat steps 3 through 6 for the other side of the drawer front.
NOTE: Adjust the clip on the top of the second glide bracket
so that it is in the same position as the side you adjusted first.
8. Close the drawer and visually inspect the gap. Repeat steps 2
though 7 until the drawer fronts are aligned.
FINAL STEPS
1. Replace the interior drawer bins.
NOTE: The bins must be placed into the drawers correctly so
that the refrigerated drawers will close and operate properly.
See “Remove and Replace Drawer Fronts.”
2. Close the refrigerated drawers.
Loading ...
Loading ...
Loading ...