Loading ...
Loading ...
Loading ...
23
1. Open the drawer to its full extension, and remove the interior
bin.
2. Left-hand drawer only: Remove the wiring connection cover.
Press in on the side of the cover to release the tab from the
slot, and then pull the cover away from the bracket.
A. Cover tab B. Wiring connection cover
3. Left–hand drawer only, disconnect the wiring.
NOTE:
� On one side of the wiring connector, insert the screwdriver
blade between the connector tab and the connector to
release. Repeat for the opposite side. Pull the wiring
connector apart.
4. Remove the drawer front.
Style 1: Bottom Release Lever
� Push up on the lever at the bottom of the drawer glide bracket
to release the drawer front from the bracket.
� Lift the drawer front up and off the drawer glide brackets.
A. Drawer glide bracket B. Release lever
Style 2: Bottom Screws
� Loosen the two top screws attaching the drawer glide brackets
to the drawer front.
NOTE: Loosen screws three to four turns. Keep the screws in
the drawer front.
� Remove the two bottom screws attaching the drawer glide.
� Lift the drawer front up and off the top screws.
A. Four Bracket screws
5. Slide the drawer glides back into the refrigerator.
REPLACE DRAWER FRONT
1. Pull out the drawer glides until they are full extended.
2. Style 1: Bottom Release Lever
� Push up on the lever at the bottom of the drawer glide
bracket to open. Insert the drawer front bracket into the
drawer glide bracket and release the lever.
Style 2: Bottom Screws
� Lower the loosened screws in the top of the door front into
the upper notches in the drawer glide.
� Align the holes in the bottom of the drawer glides.
� Replace two screws removed previously and tighten all
four screws.
NOTE: It helps if one person holds the drawer glides steady
while another person aligns the drawer front and inserts the
screws into the notches.
3. Reconnect Wiring (if applicable)
� Align the two ends of the wiring connector and push them
together until you hear a click sound and feel the tabs snap
into place on the connector.
� Gently pull on the wiring connection to ensure the wiring
connection is completely seated. Replace the wiring cover.
NOTE: The wiring connection must be complete for the
drawer temperature control to operate.
4. Replace the drawer bins onto the drawer glides.
Remove and Replace Freezer Drawer Front
Depending on the width of your door opening, it may be necessary
to remove the freezer drawer front to move the refrigerator into
your home.
Loading ...
Loading ...
Loading ...