Loading ...
Loading ...
Loading ...
25
4 Permanent settings in programming mode
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Coffee’
T Press the ‘’ button for around 2 seconds to exit program-
ming mode.
In the programme item
‘3/6’/ ‘Customise cup fill volume’ you can
make the following setting:
U
‘Active’: The function ‘Permanently setting the amount of
water for the cup size’ is activated. You can adjust the amount
of water to the cup size by pressing and holding the relevant
preparation button.
U
‘Inactive’: The function ‘Permanently setting the amount of
water for the cup size’ is deactivated. The amount of water
cannot be adjusted to the cup size by pressing and holding
the relevant preparation button.
Example:Proceed as follows to disable the function ‘Permanently
setting the amount of water for the cup size’.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘3/6’ is displayed.
T Press the
‘Customise cup fill volume’ button.
‘Customise cup fill volume’
T Press the ‘Inactive’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘3/6’
T Press the ‘’ button to exit programming mode.
In the programme item
‘3/6’/ ‘One-off settings’ you can make the
following setting:
U
‘Active’: One-off settings can be made during preparation (e.g.
coffee strength or amount of water).
U
‘Inactive’: One-off settings cannot be made during prepara-
tion. The product is prepared according to the settings in pro-
gramming mode (
‘3/6’ / ‘Expert mode’).
Enable or disable setting
of cup volume
Enable or disable one-off
settings
Loading ...
Loading ...
Loading ...