Loading ...
Loading ...
Loading ...
15
2 Preparation
2 Preparation
E The display shows four products you can prepare. Press the
‘>’ button to display more products.
E You can stop the machine at any time while a speciality coffee
or hot water is being prepared. To do this, press the
‘Cancel’
button.
E During the grinding operation you can select the coffee
strength of single products by pressing the
‘<’ and ‘>’ but-
tons.
E During preparation you can change the preset amounts (e.g.
water and amount of milk) by pressing the
‘<’ and ‘>’ but-
tons.
Coffee tastes best served hot. A cold porcelain cup cools the bever-
age – and impairs the taste. We therefore recommend prewarming
the cups. The full coffee aroma can develop only in prewarmed cups.
You can purchase a JURA cup warmer from your specialised dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Adjusting the product settings’).
Your JURA prepares latte macchiato, cappuccino and flat white at the
touch of a button. There is no need to move the glass or cup.
E This chapter applies to the professional fine foam frother and
the fine foam frother.
Example:Proceed as follows to prepare one latte macchiato.
Precondition:Milk is connected to the fine foam frother.
T Place a glass under the fine foam frother.
E If you are using the professional fine foam frother, turn the
setting wheel to the Milk Foam positioné.
T Press the
‘Latte macchiato’ button.
‘Latte macchiato’, the preset amount of milk foam flow into
the glass.
Latte macchiato,
cappuccino and other
speciality coffees with
milk
Loading ...
Loading ...
Loading ...