User Manual - Page 111

For LEON 5D 2015.

Loading ...
Loading ...
Loading ...
Instruments and warning/control lamps
Depending on the model, additional text
me
s
s
ages may be viewed on the instrument
panel display. These may be purely informa-
tive or they may be advising of the need for
action page 104, Instruments.
Depending upon the equipment fitted in the
vehicle, instead of a warning lamp, some-
times a symbol may be displayed on the in-
strument panel.
When certain control and warning lamps are
lit, an audible warning is also heard.
WARNING
If the warning lamps and messages are ignor-
ed, the vehic
le may stall in traffic, or may
cause accidents and severe injuries.
Never ignore the warning lamps or text
messages.
Stop the vehicle safely as soon as possible.
Park the vehicle away from traffic and en-
sure that there are no highly flammable ma-
terials under the vehicle that could come into
contact with the exhaust system (e.g. dry
grass, fuel).
A faulty vehicle represents a risk of acci-
dent for the driver and for other road users. If
necessary, switch on the hazard warning
lamps and put out the warning triangle to ad-
vise other drivers.
Before opening the bonnet, switch off the
engine and allow it to cool.
In any
vehicle, the engine compartment is a
hazardous area and could cause severe inju-
ries page 246.
CAUTION
Failure to heed the control lamps and text
me
ss
ages when they appear may result in
faults in the vehicle.
Engine management*
This warning lamp monitors the engine man-
ag
ement
sy
stem for petrol engines.
The warning lamp  (Electronic Power Con-
trol) lights up when the ignition is switched
on while system operation is being verified. It
should go out once the engine is started.
If there is a fault in the electronic engine
management system while you are driving,
this warning lamp will light up. Stop the vehi-
cle and seek technical assistance.
Engine pre-heating/fault system*
The warning lamp lights up to show that the
glo
w p
lug
s are preheating the diesel engine.
The control lamp lights up
If the control lamp lights up when the en-
gine is started it means that the glow plugs
are preheating. When the warning lamp goes
off, the engine should be started straight
away.
Control lamp flashes
If a fault develops in the engine management
system while you are driving, the glow plug
system lamp will flash . Take the vehicle to
a specialised workshop as soon as possible
and have the engine checked.
109
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...