Loading ...
Loading ...
Loading ...
Driving
Rear assist settings
R
ear assist off
ers the user the possibility to
change the image's brightness, contrast and
colour settings.
To change these settings:
●
Stop the vehicle in a safe place without
switching off the ignition or the infotainment
system.
●
Apply the parking brake.
●
Select reverse gear.
●
Press the function button displayed on
the screen.
●
Make the desired adjustments on the menu
by pressing the –/+ function buttons or by
moving the scroll button.
Requirements for parking and manoeu-
vring with the rear assist
The system should not be used in the follow-
ing cases:
●
If the image displayed is not very reliable or
is distorted, or if the lens is dirty.
●
If the area behind the vehicle is incomplete.
●
If the vehicle is heavily loaded.
●
If the position of the camera has changed
after a rear-end collision. Have the system
checked by a specialised workshop.
Familiarising yourself with the system
To familiarise yourself with the system, the
orientation lines and their function, SEAT rec-
ommends practising in a place without too
much traffic or in a car park when there are
good weather and visibility conditions.
Parking and manoeuvring with re-
verse assist
Fig. 212
Display on the Infotainment system
scr
een.: guide lines.
Meaning of the orientation lines
›
›
›
Fig. 212
Lateral lines: extension of the vehicle
(approximately in its total width) on the
road.
End of the side lines: approx. 2 m behind
the vehicle on the road.
Intermediate line: approx. 1 m behind the
vehicle on the road.
1
2
3
Horizontal red line: a saf
e dist
ance of
approx. 40 cm at the rear of the vehicle
on the road.
Switching the system on and off
●
Reverse assist is connected by a contact
when engaging reverse gear.
●
The system switches off 8 seconds after
disengaging reverse gear and immediately
after removing the contact.
●
The camera will stop transmitting images
above the speed of 15 km/h (9 mph) with re-
verse engaged.
In combination with the parking aid plus sys-
tem
›››
page 280, the camera image will no
longer be displayed when reverse gear is dis-
engaged, and the system will display the op-
tical information provided by the parking aid
system.
It is also possible to hide the reverse assist im-
age:
●
By pressing one of the Infotainment system
buttons on the display.
●
OR: by clicking on the miniature vehicle
shown on the screen.
If you wish to display the rear assist image
again:
●
Disengage and re-engage reverse gear.
4
292
Loading ...
Loading ...
Loading ...