Seat Ateca 2020

User Manual - Page 148

For ATECA 2020.

PDF File Manual, 376 pages, Read Online | Download pdf file

ATECA 2020 photo
Loading ...
Loading ...
Loading ...
Operation
The purpose of the net partition is to prevent
the it
ems in the boot fr
om moving into the
cabin, e.g. in the event of sudden braking.
Fitting the net partition
The partition net can be fitted behind the rear
seat or, depending on the features, behind
the front seats with the second row of seats
lowered.
If required, remove the rear shelf
››
page 140.
Secure the net partition in the left housing
of the roof
››
Fig. 138
A
. Make sure to move
the cr
oss r
od down beyond the upper posi-
tion.
Hook in the net partition on the rear right-
hand side roof housing by pressing on the rod
››
Fig. 138
A
.
Secure two hooks of the partition net to the
f
ast
ening rings of the boot
››
Fig. 138
B
and
tight
en the str
aps firmly.
To remove it proceed in reverse order.
WARNING
During a sudden driving or braking ma-
noeuvre
, or in the event of an accident, ob-
jects could be flung though the interior and
cause serious or fatal injuries.
Check whether the cross rods are cor-
rectly engaged.
Alw
ays secure objects, even when the
net partition is properly assembled.
There should be nobody behind the net
partition when the vehicle is moving.
CAUTION
If the net partition is secured incorrectly or
t
o incorr
ect points, this may damage the
vehicle.
Roof carrier*
Intr
oduction
The vehicle roof has been designed to opti-
mise aer
odynamics. F
or this reason, cross
bars or conventional roof carrier systems
cannot be secured to the roof water drains.
As the roof water drains are integrated in the
roof to reduce air resistance, only SEAT-ap-
proved cross bars and roof carrier systems
can be used.
Cases in which cross bars and the roof
carrier system should be disassembled.
When they are not used.
When the vehicle is washed in a car wash.
When the vehicle height exceeds the maxi-
mum height, for example, in some garages.
WARNING
Alw
ays secure the load properly using
belts or retaining straps that are suitable
and in a good condition.
Bulky, heavy, long or flat loads have a
negative effect on aerodynamics, the cen-
tre of gravity and driving performance.
Avoid sudden braking and manoeuvres.
Adapt your speed and driving style at all
times to suit visibility, weather, road and
traffic conditions.
CAUTION
Remo
ve the cross bars and the roof carri-
er system before entering a car wash.
Vehicle height is increased by the instal-
lation of cross bars or a roof carrier system
and the load secured on them. For this pur-
pose, check that your vehicle's height does
not surpass the headspace limit, for exam-
ple, for underpasses or for entering garage
doors.
Cross bars, the roof carrier system and
the load secured on them should not inter-
fere with the roof aerial or hamper the path
of the panoramic sun roof and the rear lid.
On opening the rear lid make sure that it
does not knock into the roof load.
146
Loading ...
Loading ...
Loading ...