Seat Ateca 2020

User Manual - Page 234

For ATECA 2020.

PDF File Manual, 376 pages, Read Online | Download pdf file

ATECA 2020 photo
Loading ...
Loading ...
Loading ...
Driving
In the Individual pr
ofil
e it is possible to con-
figure the characteristics of the vehicle using
the Profile setup function button.
An icon on the touch screen provides infor-
mation about the active profile. The selector
displays the selected profile with a red LED.
Driving pro-
file
Char
acteristics

Places the vehicle in a low state
of consumption, facilit
ating a
fuel-saving driving style that is
respectful to the environment.
Normal
Offers a balanced driving experi-
ence, suit
able for everyday use.
Sport
Provides a complete dynamic
perf
ormance in the v
ehicle, ena-
bling the user a more sporty driv-
ing style.
Individual
It allows you to personalise the
configur
ation. The functions that
can be adjust
ed depend on the
equipment fitted in the vehicle.
Offroad
a)
It adjusts the vehicle's parame-
ters in order to maintain optimal
off-road driving.
Snow
a)
It adjusts the vehicle's behaviour
for driving on slippery road sur-
faces, optimising grip and ma-
noeuvrability.
a)
Only for 4Drive models.
WARNING
When operating SEAT Drive Profile, pay at-
tention t
o all traffic: doing otherwise could
cause an accident.
Note
When the engine is swit
ched off it will
store the driving profile that was selected
when the ignition was turned off. When re-
started, the engine and the gearbox will
start in their Normal mode. To return the en-
gine and gearbox to the desired mode, re-
select the corresponding driving profile by
turning the Driving Experience button or se-
lect from the infotainment display.
When the vehicle is restarted after using
the Offroad or Snow settings, the system is
always activated in the Normal profile.
Your speed and driving style must always
be adjusted to visibility, weather, and traf-
fic conditions.
The Eco profile is not recommended
when towing a vehicle.
Driving tips
Running in
Please observe the instructions for running-in
ne
w components.
Running-in the engine
A new engine must be driv
en through a run-in
period during its first 1500 kilometres (1000
miles). During its first few hours of running, the
internal friction in the engine is greater than
later on when all the moving parts have bed-
ded down.
How the vehicle is driven for the first 1500 km
(1000 miles) influences the future engine per-
formance. Throughout the life of the vehicle, it
should be driven at a moderate speed (espe-
cially when the engine is cold) this will reduce
engine wear and increase its useful life. Never
drive at extremely low engine speeds. Always
engage a lower gear when the engine works
“irregularly”. For the first 1000 km or
600 miles, please note:
Do not use full throttle.
Do not force the engine above two thirds of
its maximum speed.
Do not tow a trailer.
Between 1000 and 1500 kilometres (600
to 1000 miles), gradually increase power
until reaching the maximum speed and high
engine speeds.
Running in new tyres and brake pads
Replacement of wheel rims and new tyres
››
page 327.
Information about brakes
››
page 264.
232
Loading ...
Loading ...
Loading ...