Loading ...
Loading ...
Loading ...
sharkclean.comsharkclean.com
ABOUT THE SHARK ION™ ROBOT
With Smart Sensor Technology, your robot uses an array of sensors to navigate around walls, furniture legs,
and other obstacles while it cleans. The robot may gently bump into obstructions or linger in one spot, and
it may not cover every area in a single cleaning. For best results, prepare your home as indicated below,
and schedule a daily cleaning to ensure all floor areas are regularly maintained.
CORDS AND OBSTRUCTIONS
DOORWAY THRESHOLDS
LOW-CLEARANCE FURNITURE
RETURNING TO DOCK
Robot Traps Robot Friendly
Before cleaning, clear away cords and other
obstructions or block o the area with the included
BotBoundary™ Strips.
Your robot may have some trouble clearing some
high thresholds. Block o high thresholds with
BotBoundary strips.
To prevent your robot from becoming trapped,
use furniture risers or BotBoundary strips.
If your robot roams too far, it could have trouble
finding the Charging Dock. It may be helpful to
block o part of your home with BotBoundary
strips, or to add a second dock (available at
sharkaccessories.com)
PREPARING FOR USE
Place the charging dock on a level surface with its back against a wall, in a space without obstructions, that
can easily be accessed by your robot. Remove any objects that are closer than 3 feet (1 meter) from either
side of the dock, or closer than 5 feet (1.52 meters) from the front of the dock. Plug the Charging Adapter
into a wall outlet. The dock must be plugged in continually for the robot to find it. The robot will beep when
it starts charging on the dock.
CHARGING DOCK SET-UP
INSTALLING THE SIDE BRUSHES
Snap the 2 included Side Brushes onto the square
pegs on the bottom of the robot.
5 ft.
3 ft.
3 ft.
Loading ...
Loading ...
Loading ...