Loading ...
Loading ...
Loading ...
• If the button is continually pushed, the set speed will
continue to decrease in 5 mph decrements until the
button is released. The decrease in set speed is re-
flected in the DID.
Metric Speed (km/h)
• Pushing the SET - button once will result in a 1 km/h
decrease in set speed. Each subsequent tap of the
button results in a decrease of 1 km/h.
• If the button is continually pushed, the set speed will
continue to decrease in 10 km/h decrements until the
button is released. The decrease in set speed is re-
flected in the DID.
NOTE:
•
When you override and push the SET + button or SET -
buttons, the new Set Speed will be the current speed of
the vehicle.
• When you use the SET - button to decelerate, if the
engine’s braking power does not slow the vehicle
sufficiently to reach the set speed, the brake system
will automatically slow the vehicle.
• The ACC system decelerates the vehicle to a full stop
when following a target vehicle. If an ACC host vehicle
follows a target vehicle to a standstill, after two
seconds the driver will either have to push the RES
(resume) button, or apply the accelerator pedal to
reengage the ACC to the existing Set Speed.
• The ACC will bring the vehicle to a complete stop
while following a target vehicle and hold the vehicle
for two seconds in the stop position. If the target
vehicle does not start moving within two seconds, the
ACC system will display a message that the system
will release the brakes and that the brakes must be
applied manually. An audible chime will sound when
the brakes are released.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191
Loading ...
Loading ...
Loading ...