Loading ...
Loading ...
Loading ...
ITEM REMARKS PAGE
Headlamp Check operation page 35
Brake light/taillight Check operation
-
Riding gear
Wear approved helmet,
goggles, and protective
clothing
page 11
Winch (if equipped)
Inspect cable and
switch
page 89
Grass and leaves Remove grass, leaves,
foreign matter, and
other flammable
material or debris,
especially near the
exhaust system.
-
DRIVING PROCEDURES
NEW OPERATOR DRIVING PROCEDURES
1. Wear protective riding gear. See the Safe Riding Gear section.
2. Perform the pre-ride inspection.
3. Place the transmission in PARK.
4. Lock the brake holding latch.
5. Mount the vehicle from the left side.
6. Sit upright with both feet on the footrests and both hands on the handlebars.
7. Start the engine and allow it to warm up.
8. Shift the transmission into gear.
9. Check your surroundings and determine your path of travel.
10. Release the brake holding latch.
11. Slowly depress the throttle with your right thumb and begin driving.
12. Drive slowly. Practice maneuvering and using the throttle and brakes on level
surfaces.
75
OPERATION
Loading ...
Loading ...
Loading ...