Loading ...
Loading ...
Loading ...
TAILLIGHT REPLACEMENT
NOTICE
For Scrambler models, the taillight assembly is not serviceable. If the light fails
to operate properly, replace the entire taillight assembly.
Sportsman models only:
To replace the taillights, do the following:
LEFT TAILLIGHT:
1. Remove the harness connector from the back of the light assembly.
2. Remove the 3 fasteners securing the light assembly and remove the light
assembly.
3. Install the new light assembly and tighten the 3 fasteners to secure the light
assembly.
4. Reinstall the harness connector. Test the light for proper operation
RIGHT TAILLIGHT:
1. Remove the heat shield covering the light assembly.
2. Remove the harness connector from the back of the light assembly.
3. Remove the 3 fasteners securing the light assembly, and then remove the
assembly.
4. Install the new light assembly, then re-affix and tighten the 3 fasteners.
5. Reinstall the harness connector.
6. Reinstall the heat shield.
7. Test the light for proper operation.
125
MAINTENANCE
Loading ...
Loading ...
Loading ...