Loading ...
Loading ...
Loading ...
28
The temperature last measured, i.e. only the last value of a series of measurements, is automatically stored as soon as
the thermometer switches itself o or is switched o. There are 10 memory spaces available for this.
To switch the thermometer o, press the
and buttons simultaneously for approx. 3 seconds.
If you do not press any other buttons, the thermometer automatically switches o approx. one minute after displaying
the measured value.
To call up the saved values, switch the thermometer on and press the
button.
The date, time, storage space number, the measurement mode symbol and the temperature are displayed in turn.
Browse through the stored measurements by pressing the button repeatedly.
8 Replacing the battery
When the batteries get weak, the battery warning symbol appears . It is still possible to measure temperature. The
batteries must be replaced. When the battery symbol flashes and appears in the display, the batteries must be
replaced. If the batteries are too flat, then the thermometer will switch o automatically.
Note:
• When changing the batteries, use batteries of the same type, make and capacity.
• Always replace all batteries at the same time.
• Do not use rechargeable batteries.
• Use batteries free from heavy metals.
Loading ...
Loading ...
Loading ...