Loading ...
Loading ...
Loading ...
Gas connection
47
Gas pressure regulator
The included pressure regulator corre-
sponds with the gas type of the appli-
ance. Verify before installing.
The adjusted pressure is:
Natural gas 4“w.c.
LP gas 10”w.c.
a
Appliance
b
½" NPT
c
Regulator
As shown in the above diagram, the in-
cluded regulator must be used when
connecting the Miele appliance to your
gas supply. This item has been custom-
ized by Miele to meet all applicable
safety requirements. Make sure the reg-
ulator is easily accessible for adjust-
ment after the appliance has been in-
stalled.
For convenience, an AGA or CGA ap-
proved flexible stainless steel gas hose
(accordion type) may be used between
the gas connection and the regulator.
This will allow the appliance to be lifted
out of the countertop for cleaning or
servicing. Make sure that any drawers,
cabinet doors, etc., do not rub on this
gas hose.
Unsuitable regulators may cause a
gas leak.
Do not use any regulator unless it
has been supplied by Miele.
If there is any doubt concerning installa-
tion contact the Miele Technical Service
Department.
Leakage test
After connecting the appliance check
all fittings for gas leaks e.g. with
soapy water.
Loading ...
Loading ...
Loading ...