User Manual - Page 247

For 2019 M2 Competition Coupe.

Loading ...
Loading ...
Loading ...
NOTICE
In the case of body contact between the two
vehicles, a short circuit can occur during jump-
starting. There is a risk of damage to property.
Make sure that no body contact occurs.
Preparation
1. Check whether the battery of the other vehi‐
cle has a voltage of 12 volts. The voltage in‐
formation can be found on the battery.
2. Switch off the engine of the assisting vehicle.
3. Switch off any electronic systems/power con‐
sumers in both vehicles.
Starting aid terminals
The starting aid terminal in the engine compart‐
ment acts as the battery's positive terminal.
Open the cover of the starting aid terminal.
The body ground or a special nut acts as the bat‐
tery negative terminal.
Connecting the cables
To prevent personal injury or damage to both ve‐
hicles, adhere strictly to the following procedure.
1. Pull off the lid of the BMW starting aid termi‐
nal.
2. Attach one terminal clamp of the positive
jumper cable to the positive terminal of the
battery, or to the corresponding starting aid
terminal of the vehicle providing assistance.
3. Attach the terminal clamp on the other end of
the cable to the positive terminal of the bat‐
tery, or to the corresponding starting aid ter‐
minal of the vehicle to be started.
4. Attach one terminal clamp of the negative
jumper cable to the negative terminal of the
battery, or to the corresponding engine or
body ground of assisting vehicle.
5. Attach the second terminal clamp to the neg‐
ative terminal of the battery, or to the corre‐
sponding engine or body ground of the vehi‐
cle to be started.
Starting the engine
Never use spray fluids to start the engine.
1.
Start the engine of the assisting vehicle and
let it run for several minutes at an increased
idle speed.
2. Start the engine of the vehicle that is to be
started in the usual way.
If the first starting attempt is not successful,
wait a few minutes before making another at‐
tempt in order to allow the discharged battery
to recharge.
3. Let both engines run for several minutes.
4. Disconnect the jumper cables in the reverse
order.
Check the battery and recharge, if needed.
Seite 247
Breakdown assistance
MOBILITY
247
Online Edition for Part no. 01402722869 - VI/18
Loading ...
Loading ...
Loading ...