Loading ...
Loading ...
Loading ...
DSC Dynamic Stability Control deactivated
DSC is deactivated.
DSC, refer to page 157.
M Dynamic Mode MDM
M Dynamic Mode MDM is switched on.
M Dynamic Mode (MDM), refer to
page 158.
Indicator light also flashes: MDM controls
the drive and braking forces. The vehicle
is stabilized.
Indicator lights light up: MDM has mal‐
functioned. Have the system checked by
a dealer’s service center or another quali‐
fied service center or repair shop.
M Dynamic Mode (MDM), refer to
page 158.
Flat Tire Monitor FTM
The Flat Tire Monitor signals a loss of
tire inflation pressure in a tire.
Reduce your speed and stop cautiously.
Avoid sudden braking and steering maneuvers.
Flat Tire Monitor, refer to page 143.
Tire Pressure Monitor TPM
The indicator light lights up: the Tire
Pressure Monitor reports a low tire infla‐
tion pressure or a flat tire. Follow the in‐
formation in the Check Control message.
The indicator light flashes and then continuously
lights up: no flat tire or loss of tire inflation pres‐
sure can be detected.
▷ Interference caused by systems or devices
with the same radio frequency: after leaving
the area of the interference, the system auto‐
matically becomes active again.
▷ TPM was unable to complete the reset. Re‐
set the system again.
▷ A wheel without TPM wheel electronics is
mounted: have it checked by a dealer’s serv‐
ice center or another qualified service center
or repair shop as needed.
▷ Malfunction: have the system checked by a
dealer’s service center or another qualified
service center or repair shop.
Tire Pressure Monitor, refer to page 139.
Steering system
Steering system in some cases not
working.
Have the system checked by a dealer’s
service center or another qualified service center
or repair shop.
Emissions
▷ The warning light lights up:
Emissions are deteriorating. Have the
vehicle checked as soon as possible.
▷ The warning light flashes under certain cir‐
cumstances:
This indicates that there is excessive misfiring
in the engine.
Reduce the vehicle speed and have the sys‐
tem checked immediately; otherwise, serious
engine misfiring within a brief period can seri‐
ously damage emission control components,
in particular the catalytic converter.
Socket for Onboard Diagnosis, refer to
page 237.
Lane departure warning
System is switched on and under certain
circumstances warns if a detected lane is
left without flashing beforehand.
Lane departure warning, refer to page 151.
Seite 119
Displays
CONTROLS
119
Online Edition for Part no. 01402722869 - VI/18
Loading ...
Loading ...
Loading ...