Loading ...
Loading ...
Loading ...
WARNING
Depending on the setting, the DSC may only
be available to a limited extent or may not be
available with activated M drive. There is a risk
of accidents or risk of damage to property.
Heed the settings for DSC in the M drive and
react actively, if necessary. Modify your driving
style and react, if necessary.
Display in the instrument cluster
Selected driving program corre‐
sponds to the number of illumi‐
nated fields.
Launch Control
Concept
Launch Control enables optimum acceleration
on surfaces with good traction.
General information
The use of Launch Control causes premature
component wear since this function represents a
very heavy load for the vehicle.
Do not use Launch Control during the break-in,
refer to page 197, period.
Requirements
Launch Control is available when the engine is
warmed up, that is, after uninterrupted driving of
at least 6 miles/10 km.
To start with Launch Control do not steer the
steering wheel.
Activate Launch Control
1.
Deactivate Dynamic Stability Control, refer to
page 157.
2. Select Sequential mode with gear 1.
3. With the engine running, apply the brake with
the left foot.
4. Fully depress the accelerator pedal.
The starting engine speed adjusts.
5. If necessary, change the starting engine
speed by 500 rpm via cruise control.
6. Release the brake, the vehicle accelerates.
Continue to depress the accelerator pedal.
Upshifting occurs automatically as long as the
accelerator pedal is fully depressed.
Launch Control is available again only after a cer‐
tain distance has been driven.
System limits
This transmission has an overheating protection
mechanism, which protects the clutch from ex‐
treme stress.
▷ Indicator light lights up yellow: trans‐
mission too hot.
Avoid high engine stress and fre‐
quent starts.
▷ Indicator light lights up red: transmission is
overheating.
Further driving at a moderate pace is possi‐
ble. At the next opportunity, stop the vehicle,
shut off the engine and allow the transmis‐
sion to cool down.
Avoid fast starts. On uphill grades, do not keep
the vehicle stationary by applying a small amount
of acceleration while riding the clutch, as this
may cause the transmission to overheat.
During traffic jams or at very low speeds, use the
Low Speed Assistant, refer to page 112.
Seite 115
Driving
CONTROLS
115
Online Edition for Part no. 01402722869 - VI/18
Loading ...
Loading ...
Loading ...