Loading ...
Loading ...
Loading ...
6
• To make the most of your new appliance, please read the user
instructions carefully and keep them handy for future consultation.
BEFORE USING THE GLASS CERAMIC HOB
INSTALLATION
Cooktop
• The cooktop must be set into a worktop between 20 mm and 50
mm deep.
• There must be nothing between the cooktop and the oven (cross
rails, brackets, etc.).
• The distance between the lower face of the glass ceramic hob and
the cupboard or separating panel must be at least 20 mm.
• If the cooktop is to be installed next to a column unit, leave a
distance of at least 100 mm from the edge of the cooktop to the
side of the column unit.
• Make an opening in the worktop, respecting the dimensions indicated
in the enclosed product description sheet.
• Apply the supplied gasket to the cooktop (unless it has already been
tted), after having cleaned its surface.
Important
In order to prevent the electronic circuits from overheating, and therefore
from being damaged, we recommend the following:
• Do not install the cooktop near a dishwasher or washing machine,
so that the electronic circuits do not come into contact with steam
or moisture, which could damage them.
If an oven (from our range of ovens) is installed beneath the cooktop, make
sure that it is equipped with a cooling system.
If the temperature of the electronic circuits exceeds the maximum permitted
temperature, the cooktop will switch off automatically; in this case, wait
for a few minutes until the internal temperature of the electronic circuits
reaches a tolerable level, at which point it will be possible to switch the
hob on again.
• Switch the hob off after use.
Front
Rear wall
min. 5 mm
min. 20 mm
min. 5 mm
3
2
1
Loading ...
Loading ...
Loading ...