Loading ...
Loading ...
Loading ...
21
How to Clean : Silicones
Open the juice cap, hold the chamber and juice cap with
one hand, and remove the juice cap packing with your
other hand to disassemble.
Please be careful not to drop or damage the juice
cap and chamber when disassembling the unit.
Push the intermediate gear from the bottom side
of the chamber to remove the gear.
Place the intermediate gear after cleaning.
Intermediate gear
Remove silicone brush from the spinning brush
holder.
Use a cleaning brush and wash the inside and
outside of the spinning brush holder in running
water.
Hold the outer side of the silicon brush and pull it in the
direction of the arrow. Otherwise, the silicon brush can be
torn or the brush holder can be broken. Please follow the
recommended method to separate the silicone brush
Wash the silicone brush in running water in the same
manner.
Silicone brush
1
2
3
After cleaning, attach the silicone brush by
pressing it back to the brush holder in the
direction opposite to the removing direction,
and pull the inner wing inward with your other
hand as shown in the picture so that the brush
would fit into the grooves properly.
If the silicone brush is not inserted properly, the packing may
become worn or fall out during juice extraction.
Juice Cap Packing
Loading ...
Loading ...
Loading ...