Loading ...
Loading ...
Loading ...
CLOCK FUNCTIONS
CLOCK FUNCTIONS TABLE
Clock function Application
TIME OF DAY
To show or change the time
of day. You can change the
time of day only when the
oven is off.
DURATION
To set how long the oven
works. Use only when a
heating function is set.
END
To set when the oven turns
off. Use only when a heat-
ing function is set.
TIME DELAY
Combination of DURATION
and END function.
MINUTE
MINDER
Use to set a countdown
time. This function has no
effect on the operation of
the oven. You can set the
MINUTE MINDER at any
time, also if the oven is off.
00:00
COUNT UP
TIMER
If you do not set any other
clock function the COUNT
UP TIMER automatically
monitor how long the oven
works.
It is on immediately when
the oven starts to heat.
The Count Up Timer cannot
be used with the functions:
DURATION, END, core
temperature sensor.
SETTING AND CHANGING THE TIME
After the first connection to the mains, wait until the
display shows and "12:00". "12" flashes.
1. Press or to set the hours.
2. Press to confirm and set the minutes.
The display shows and the set hour. "00"
flashes.
3. Press or to set the current minutes.
4. Press to confirm or the set time of day will
be saved automatically after 5 seconds.
The display shows the new time.
To change the time of day press
again and
again until the indicator for the time of day
flashes in the display.
SETTING THE DURATION FUNCTION
1. Set a heating function.
2. Press again and again until starts to
flash.
3. Press or to set the minutes and then the
hours. Press to confirm.
When the set Duration time ends the signal sounds
for 2 minutes.
and time setting flash in the
display. The oven turns off automatically.
4. Press any button or open the oven door to stop
the signal.
5. Turn the knobs to the off position.
SETTING THE END FUNCTION
1. Set a heating function.
2. Press again and again until starts to
flash.
3. Press or to set the hours and then the
minutes. Press to confirm.
At the set End time the signal sounds for 2 minutes.
and time setting flash in the display. The oven
turns off automatically.
4. Press any button or open the oven door to stop
the signal.
5. Turn the knobs to the off position.
SETTING THE TIME DELAY FUNCTION
1. Set a heating function.
2. Press again and again until starts to
flash.
3. Press or to set the minutes and then the
hours for DURATION time. Press to
confirm.
The display shows flashing .
4. Press or to set the hours and then the
minutes for END time. Press to confirm. The
display shows and the set
temperature.
Oven turns on automatically later on, works for the
set DURATION time and stops at the set END time.
11
Loading ...
Loading ...
Loading ...