Loading ...
Loading ...
Loading ...
5. Check hoses for cracks, deterioration, abrasions or leaks. Replace as
needed.
6. Reinstall the hose assembly and secure the clamp at the engine. Push the
other end of the hose firmly into the airbox fitting.
NOTICE
Operation of the vehicle without breather hoses can cause engine damage.
Always reinstall a breather hose after removing it for service.
INTAKE PRE-FILTERS
The engine intake pre-filter
w
is located on the right side of the cargo box. The
PVT intake pre-filter
q
is located on the left side of the cargo box.
Inspect both pre-filters before each use of the vehicle to ensure adequate air
flow. If necessary, remove the pre-filters and clean with soapy water. Dry with
low pressure compressed air.
NOTICE
When washing the vehicle, always avoid spraying water directly toward the
PVT intake duct. See the Washing the Vehicle section for recommended
washing procedures.
111
MAINTENANCE
Loading ...
Loading ...
Loading ...