Loading ...
Loading ...
Loading ...
PVT DRYING
There may be some instances when water is accidently ingested into the PVT
system. Use the following instructions to dry it out before operating.
NOTICE
When washing the vehicle, always avoid spraying water directly toward the
PVT intake duct. See the Washing the Vehicle section for recommended
washing procedures.
1. Remove the drain plug
q
from the
bottom of the clutch box. Allow the
water to drain. Reinstall the drain
plug securely.
2. Place the transmission in PARK.
Apply the brakes. Start the engine.
3. Apply varying throttle for seconds
to expel the moisture and air-dry
the belt and clutches. Do not hold
the throttle wide open for more
than 10 seconds.
4. Allow the engine RPM to settle to
idle speed. Apply the brakes. Shift
the transmission to the lowest
available range.
5. Test for belt slippage. If the belt
slips, repeat the process.
6. Your vehicle requires service as
soon as possible, which your
authorized dealer can provide.
AIR FILTER
Always clean all dirt and debris away from the air box area before servicing the
air filter. Always change the air filter at the intervals outlined in the Periodic
Maintenance Chart.
1. Remove the cargo box access panel.
2. Clean all dirt and debris from the air box area.
109
MAINTENANCE
Loading ...
Loading ...
Loading ...