Loading ...
Loading ...
Loading ...
FEATURES AND BENEFITS
Your new MR. COFFEE
®
Coffeemaker + Hot Shot Station
TM
has the following features:
Brewing Capacity – 12 cups – Glass decanter series.
Removable Filter Basket – The filter basket lifts out for
fast and easy cleaning and filling.
Pause ‘n Serve – Can’t wait for the coffee to finish brewing?
The Pause ‘n Serve feature allows you up to 30 seconds to
pour a cup of coffee while the coffeemaker is still brewing.
Carefully remove the decanter and the Pause ’n Serve
feature will be automatically activated, temporarily stopping
the flow of coffee into the decanter.
Water Window – Show amount of water in the reservoir
for accurate filling.
Non-Stick Warming Plate – This feature allows you
to keep your coffee hot after brewing. The non-stick
attribute prevents the decanter from sticking to the
surface of the warming plate.
Brew Strength Selector – Adjusts the brewing time to
create a more full-flavored coffee.
Cord Storage – Safely stores excess cord to keep your
countertop neat.
Two-Hour Auto Shut-Off Keeps your coffee hot for two
hours, then automatically shuts off. Hot Shot Station
TM
turns off when the water temp goes below 175 degrees F.
Programmable Controls:
Clock – The clock serves as a handy kitchen clock and
allows you to set the Delay Brew feature and functions
as the FRESH BREW™ TIMER feature.
Fresh Brew™ Timer feature – Lets you know how long
your coffee has been waiting for you.
Delay Brew – Would you like to wake up to a fresh
pot of coffee? The timer allows you to preset when
you would like the coffeemaker to automatically begin
brewing your coffee, up to 24 hours in advance.
8
Self Cleaning Cycle – Enables you to easily maintain
and clean mineral deposits from your coffeemaker.
Water Indicator Light- Lets you know when the hot
water is ready.
Hot Water Dispenser- Dispenses up to 16oz of hot
water at a time.
NOTE: If you have selected any of the operating functions, the
coffeemaker will act upon the last operation selected if the
power is restored within 10 seconds after a power outage.
CLEAN YOUR APPLIANCE BEFORE USING THE FIRST TIME
Follow these simple steps:
1. Wash the decanter, decanter lid and the filter basket in a
mixture of mild detergent and water. Rinse each thoroughly
(please refer to the parts diagram listed above).
2. Wash the hot water reservoir and lid for the Hot Shot
Station
TM
with a damp cloth and rinse well. DO NOT
IMMERSE UNIT.
3. Replace all the parts and close the lid. Then, run a brew
cycle with water only, without adding coffee and coffee
filter. Replace all parts. Flush out both the Coffeemaker
and Hot Shot Station
TM
System before first use.
4. Coffeemaker: Run a brew cycle with water only, without
adding coffee and coffee filter. See Brewing Coffee Now
for instructions on brewing coffee.
When brewing is complete, turn your coffeemaker off,
discard the water in the decanter and rinse the decanter,
decanter lid, and filter basket.
5. Hot Shot Station
TM
: Open the lid and fill the water
reservoir to the Max fill line. DO NOT OVERFILL HEATING
CHAMBER. DO NOT USE MORE THAN 16 FL. OZ.(475 ml).
9
BVMC-DMX85_15ESM1.indd 9-10 3/3/15 9:11 AM
Loading ...
Loading ...
Loading ...