Loading ...
Loading ...
Loading ...
C. Adding Water and Ground Coffee
1. Open the brew basket lid. For your convenience, you
can lift out the removable filter basket.
2. Place a MR. COFFEE
®
brand 10-12 cup paper basket-
style filter or a MR. COFFEE
®
permanent filter into the
removable filter basket (sold separately). (Figure 5).
NOTE: If using paper filters, it is important that the sides of
the filter fit flush against the side of the filter basket. If filter
collapse occurs, dampen the filter before placing in the filter
basket and adding ground coffee and water.
3. Add the desired amount of coffee and gently shake to level
the coffee. See the Suggested Coffee Measurement Chart.
4. After following instructions in the Water Filtration
System, place the MR. COFFEE
®
water filter in the basket,
making sure that the side marked “this side up” faces you
and that the water filter is level.
5. Be sure the removable filter basket is properly centered
and all the way down in the brew basket and close the lid.
6. Fill the decanter with cold, fresh water to the desired
capacity (1 cup equals 5 ounces) For easy and accurate
filling, the water markings on the glass decanter and on the
dual water windows show the amount of water needed to
make the corresponding desired number of cups. Do not
fill past the “12 cup MAX line” or water will flow out of the
overfill hole in the back of the coffeemaker.
The amount of coffee brewed will always be slightly less than
the amount of water poured in the water reservoir. This is due
to the minimum absorption of water by the coffee grounds.
7. Lift the pour through reservoir lid and pour the water
into the water reservoir. Close the lid and place the
empty decanter onto the warmer plate.
NOTE: Make sure the decanter is fully placed on the warming
plate or the water and the grounds will overflow from the
filter basket. An overflow may cause personal injury or
damage to property.
14 15
CAUTION! To reduce the risk of damaging the
decanter and/or the risk of personal injury, do not add
cold water to the decanter if the decanter is already
hot. Allow the decanter to cool before using.
BREWING COFFEE NOW
1. After completing the steps in the Adding Water and Coffee
section and with the glass decanter and the filter basket
securely in place, turn the coffeemaker on by pressing the
Brew Now/Off button once. The Brew Now/Off white light
will pulse during the brewing process. It will stay lit after the
brewing is complete for up to 2 hours (Figure 7).
2. To enjoy a more full flavored cup of coffee,
press the Brew Strength button once. The
STRONG Brew Strength green light will turn
on. The coffeemaker will remain in the
Brew Strength you have selected until you
change it back to REGULAR strength by
pressing the Brew Strength button or until
you unplug the machine (Figure 8).
3. After the used coffee grounds have cooled,
carefully remove the filter basket and
discard them.
NOTE: The brew basket lid is hot after brewing.
Always allow the coffeemaker to cool down
before cleaning.
4. Prior to making a second pot of coffee,
turn the coffeemaker off. This will reset the
FRESH BREW™ TIMER feature. To turn the
coffeemaker off, press the BREW NOW/OFF button all
lights will turn off.
5. Make sure the decanter is empty before starting to brew
coffee.
6. Be sure to turn your coffeemaker off when no longer
using it.
Figure 7
Figure 8
BVMC-DMX85_15ESM1.indd 15-16 3/3/15 9:11 AM
Loading ...
Loading ...
Loading ...