Loading ...
Loading ...
Loading ...
en Programme overview
16
0 Buttons
Program setting Function
Once you have set a program, you will be shown default program settings. These are recommendations for
the set program and may vary. Depending on the program, you can adjust or activate/deactivate the pro-
gram settings to optimise the washing process for your laundry.
You can find out how to adjust program settings on ~ Page 19
N wash/Wash Once the programme has been set, the wash cycle's preset duration will be dis-
played.You can adjust the duration of the wash cycle.
Function Selecting and deselecting program steps:
Once you have set the program you require, the default program steps are displayed.
You can select and deselect program steps.
Setting the Spin program:
Once you have switched on the appliance, you can press this button to set the Spin
program.
O Rinse Adjusting the number of rinse cycles:
Once the program has been set, the preset number of rinse cycles will be displayed.
You can adjust the number of rinse cycles if required.
Rinse Hold:
If final spinning is not selected, the laundry will remain in the water after the final
rinse.
For reducing creasing when the laundry is not taken out of the appliance immediately
after the program ends.
Note: To drain the water and spin the laundry, select the Spin program.
0 Spin Adjusting the duration of the spin cycle:
Once the program has been set, the spin cycle's default duration will be displayed.
You can adjust the duration of the spin cycle if required.
Program When you switch on the appliance, the Auto Start/One Touch Start program is set
by default. If required, you can change the program before the program starts.
Water Level Once the program has been set, the program's default water level will be displayed.
You can adjust the water level if required.
Notes
■ If the water level is not shown on the display, the program you are using is one in
which the appliance automatically adjusts the water level according to the size of
the load. You can still manually adjust the water level when using these programs
if you need to.
■ Only set a low water level for light loads.
Loading ...
Loading ...
Loading ...