Loading ...
Loading ...
Loading ...
Display en
13
Y Display
Display
--------
Number/code Description Information
e.g. 50 Program duration Expected program duration in minutes.
e.g. 04 Program start
delay
Delay to the program start in hours if you have activated the Delay
start/Delay Start program setting.
E1 Water supply The machine is not filling with water properly (unable to reach default
water level). Make sure that:
■ The tap is fully open.
■ The supply hose is not kinked or trapped.
■ The filter in the water supply is not blocked. ~ Page 28
E2 Water outlet The drain pump or drain hose/drain pipe is blocked:
■ Clean the drain pump ~ Page 24
■ Clean the drain hose/drain pipe
E3 Open lid The lid must be fully closed when a program is in progress.
■ Close the lid and press the Start button
■ Remove any trapped laundry
E4 Unbalanced load ■ The laundry is not evenly distributed in the drum, creating an
imbalance.
Note: The appliance has an unbalanced load detection system,
which interrupts the spin cycle when the laundry is unevenly dis-
tributed.
Redistribute the laundry by hand to eliminate the imbalance.
■ Adjust the height of the appliance feet to level the appliance.
~ Page 9
CL Note The lid has been opened while the child lock/Child Lock/Child
lock was active.
1. Switch off the appliance.
2. Wait 5 seconds.
3. Switch the appliance on again.
F0-F8 Other faults 1. Switch off the appliance.
2. Wait 5 seconds.
3. Switch the appliance on again.
If the fault occurs repeatedly, call the after-sales service.
Loading ...
Loading ...
Loading ...