Loading ...
Loading ...
Loading ...
32_ troubleshooting and information codes
Water detected over the safe
water level.
Call for service
Jammed Key. Call for service
Motor speed sensor problem. Restart the cycle.
If the code reappears, call for service.
Temperature sensor problem. Restart the cycle.
If the code reappears, call for service.
High current detected. Restart the cycle.
If the code reappears, call for service.
High/Low voltage detected. Restart the cycle.
If the code reappears, call for service.
Too many suds are detected
during the washing session.
The unit is put on hold until the
suds are reduced. Then, the unit
will go back to the operation.
When it finishes washing, End and
Sd codes will blink in turn.
To prevent, reduce the amount of detergent.
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
troubleshooting and
information codes
WF210AN-02832A-08_EN.indd Sec4:32WF210AN-02832A-08_EN.indd Sec4:32 2012-07-27  4:37:092012-07-27  4:37:09
Loading ...
Loading ...
Loading ...