Loading ...
Loading ...
Loading ...
• Commands (Fig.6):
Push-button A = On/off lights switch.
Push-button B = On/off cooker hood switch. The appliance switches on at speed level 1, If the cooker hood
is on depress the push-button for 2 sec. to switch off the cooker hood. If the cooker hood is at speed level 1 it
will not be necessary to depress the push-button to switch the cooker hood off. Decreases the motor speed.
Display C = Indicates the motor speed level selected and activates the timer.
Push-button D = Switches on the cooker hood. Increases the motor speed. Touching the key at 3rd speed, the
intensive function runs for 10’, then the appliance go back to work at the original speed. During this function
the display blinks.
Key E = The Timer times the functions on activation for 15 minutes, after which they are switched off. The Timer
is deactivated by re-pressing Key E.
When the Timer is activated the decimal point must flash on the display. The Timer cannot be activated if the
intensive speed is functioning.
The “clean air” function is activated by pressing key E for 2 seconds when the appliance is switched off. This
switches the motor on for 10 minutes every hour at the first speed. During functioning a rotary movement of
the peripheral segments must be visualised on the display. When this time has passed the motor switches off
and the fixed letter “C” must be visualised on the display until the motor re-starts after 50 minutes for another
10 minutes and so on. Press any key apart from the light keys to return to normal functioning. Press key E to
deactivate the function.
• Anti-grease/active charcoal filters saturation:
- When display item C flashes, at a speed where it alternates with the letter F (e.g. 1 and F), the anti-grease filters
must be washed.
- When display item C flashes, at a speed where it alternates with the letter A (e.g. 1 and A), the active carbon
filters must be replaced or washed depending on the type of filter.
After the clean filter has been positioned correctly, the electronic memory must be reset by pressing button A
for approximately 5 seconds, until the indication F or A shown on the display C stops flashing.
• Commands slider (Fig.7) the key symbols are explained below:
A = Light switch
A1 = Off key
A2 = On key
C = Speed control
C1 = Off key
C2 = FIRST SPEED key
C3 = SECOND SPEED key
C4 = THIRD SPEED key.
- 9 -
Loading ...
Loading ...
Loading ...