Loading ...
Loading ...
Loading ...
GENERAL
Carefully read the following important information regarding installa tion safety and maintenance. Keep this
information booklet accessible for further consultations. The appliance has been designed for use in the duct-
ing version (air exhaust to the outside), ltering version (air circulation on the inside) or with external motor.
SAFETY PRECAUTION
1. Take care when the rangehood is operating simultaneously with an open replace or burner that depend on
the air in the environment and are supplied by other than electrical energy, as the rangehood re moves the air
from the environment which a burner or replace need for combustion. The negative pressure in the environ-
ment must not exceed 4Pa (4x10-5 bar). Provide adequate ventilation in the environ ment for a safe operation
of the rangehood. Follow the local laws applicable for external air evacuation.
Before connecting the model to the electricity network:
Inspect the data plate (positioned inside the appliance) to ascertain that the voltage and power correspond to
the network and the socket is suitable. If in doubt ask a qualied electrician.
General Warnings.
· The appliance is not intended for use by young children or inrm persons without supervision.
· Young children should be supervised to ensure that they do not play with the appliance.
· If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly quali-
ed person in order to avoid a hazard.
· There shall be adequate ventilation of the room when the range hood is used at the same time as appliances
burning gas or other fuels.
· Ensure that the range hood is cleaned frequently.
· There is a risk of re if cleaning is not carried out in accordance with the instructions.
· Do not ambé under the range hood.
Warnings for Installation:
· The exhaust air must not be discharged into a ue which is used for exhausting fumes from appliances burn-
ing gas or other fuels.
· The minimum distance between the support surfaces of the cooking pots on the cooker top and the lowest
part of the rangehood must be at least 65 cm.
· The regulations concerning the discharge of exhaust air have to be fullled.
Other Information:
This appliance conforms to the European Directive EC/2002/96, Waste Electrical and Electronic Equipment (WEEE).
By making sure that this appliance is disposed of in a suitable manner, the user is helping to prevent potential
damage to the environment or to public health.
The symbol on the product or on the packaging label on the carton indicates that the appliance should not
be treated as domestic waste, but should be delivered to a suitable electric and electronic appliance recycling
collection point. Follow local guidelines when disposing of waste. For more information on the treatment,
re-use and recycling of this product, please contact your local authority or domestic waste collection service.
INSTALLATION INSTRUCTIONS
• Electric Connection
The appliance has been manufactured as a class II, therefore no earth cable is necessary. The connection to the
mains is carried out as follows:
BROWN = L line
BLUE = N neutral
If not provided, connect a plug for the electrical load indicated on the description label. Where a plug is pro-
vided, the rangehood must be installed in order that the plug is easily accessible. An omnipolar switch with
a minimum opening of 3mm between con tacts, in line with the electrical load and local standards, must be
placed between the appliance and the network in the case of direct connection to the electrical network.
• The minimum distance between the support surfaces of the cooking pots on the cooker top and the lowest
part of the rangehood must be at least 65 cm. If a connection tube composed of two parts is used, the upper
- 6 -
Loading ...
Loading ...
Loading ...