Loading ...
Loading ...
Loading ...
REFRIGERATORSHELVES
The shelves in your refrigerator are adjustable to meet
your individual storage needs. Your model may have glass
or wire shelves.
Adjusting the shelves to fit different heights of items will
make flnding the exact item you want easier. Doing so will
also reduce the amount of time the refrigerator door is
open which will save energy.
IMPORTANT: Do not clean glass shelves with warm water
while they are cold. Shelves may break if exposed to
sudden temperature changes or impact.
CAUTION: Glass shelves are heavy. Use special care
when removing them.
Adjusting Shelves (Cantilever)
Remove shelves from the shipping position and replace
shelves in the position you want.
To remove a shelf--Tilt up the front of the shelf in the
direction of C) and lift it in the direction of (_. Putt
the shelf out.
HUMiDiTY CONTROLLED CRISPER
The crispers provide fresher tasting fruit and vegetables by
letting you easily control humidity inside the drawer.
You can control the amount of humidity in the moisture-
sealed crispers by adjusting the control to any setting
between VEGETABLE and FRUIT.
VEGETABLE keeps moist air in the crisper for best
storage of fresh, leafy vegetables.
FRUIT lets moist air out of the crisper for best storage
of fruit.
To relnstall a shelf--Tilt the front of the shetf up and
guide the shelf hooks into the slots at a desired height.
Then, lower the front of the shelf so that the hooks
drop into the slots.
Removing and installlng the humidity controlled crisper
1. To remove, putt the drawer out to futt extension.
2. Lift the front of the crisper up, then putt it straight out.
3. To install, slightly flit up the front, insert the drawer into
the frame and push it back into place.
J
Removing the glass
1. Lift up the glass under the crisper cover.
2. Putt the glass up and out.
NOTE: Pantry drawer not shown for clarity.
_1_CAUTION: Make sure that shelves are level from one
side to the other. Failure to do so may result in the shelf
falling or spilling food.
25
Loading ...
Loading ...
Loading ...