Loading ...
Loading ...
Loading ...
SELF cLEaNING
To prevent residues building up, use the Self Clean button regularly, at least monthly
in normal water areas, more often in hard water areas. You will require a sink or a large
bowl to catch the water coming out of the soleplate.
• Fill the tank to the ‘MAX’ level.
• Sit the iron on its heel.
• Plug the power cord into the wall power outlet, and switch it on.
• Turn the temperature control dial to ‘max’. Wait until the green Temperature Ready
light illuminates.
• Hold the iron over the basin or bowl, with the soleplate facing down.
• Press the Self Clean button and hold, whilst gently moving the iron to and fro
over the sink or bowl.
CAUTION: Keep clear of the escaping water and steam.
• Water and steam will wash any residues through the
soleplate, and into the sink or bowl.
• Release the steam control when done.
• Empty the remaining water from the tank.
• Turn the temperature control dial to ‘minimum’, move
the steam control to no steam.
• Unplugtheiron,andsittheirononitsheeltocool.
• When it is cold, wipe off any moisture.
• Store the iron on its heel, to avoid corrosion and
damage to the soleplate.
cLEaNING
• Unplugtheironwhennotinuse,andbeforecleaning.
• Allow the iron to cool down completely before cleaning and storing away.
• Wipe outer surfaces with a damp cloth. If necessary, use a little dishwashing liquid.
• Remove spots, or burnt on fabrics, by ironing a damp cotton or linen cloth with the
iron hot. Take care not to scratch the soleplate.
• Do not immerse the iron in water or any other liquid.
• Do not use harsh or abrasive cleaning agents, solvents or scourers on the soleplate
as these will damage the non-stick coating.
MAX
TEMPERATURE
CONTROL DIAL
STEAM CONTROL
Loading ...
Loading ...
Loading ...