Loading ...
Loading ...
Loading ...
VERTIcaL STEaMING
Vertical steaming removes wrinkles from hanging clothes, hanging curtains, and
furnishing fabrics.
• Check that there is water in the tank.
• Turn the temperature control dial to ‘max’.
• Wait until the green Temperature Ready light illuminates.
• Check that there is nothing behind the fabric that may
be damaged by the steam or heat.
• Check that pockets, turn-ups, and cuffs are empty.
• Hold the iron, with the soleplate vertical, close to (but
not touching) the fabric.
• Press the burst of steam button. You may have to
press it 2 or 3 times to pump water through the
system.
• Leave 3 seconds between bursts, to allow the
temperature to recover.
aFTER USE
• Turn the temperature control dial to ‘minimum’, move the steam control to no
steam.
• Unplugtheiron.
• Lift the top of the water inlet cover to open it.
• Hold the iron over a sink, turn it upside down, and drain the water from the tank.
CAUTION: The water may be hot.
• Sit the iron on its heel.
• Leave it to cool down completely.
• When it is cold, wipe off any moisture, and close the
water inlet cover.
• Store the iron on its heel, to avoid corrosion and
damage to the soleplate.
MAX
TEMPERATURE
CONTROL DIAL
STEAM CONTROL
MAX
TEMPERATURE
CONTROL DIAL
STEAM CONTROL
Loading ...
Loading ...
Loading ...