Loading ...
Loading ...
Loading ...
BEFORE USING FOR THE FIRST TIME
• Fill the water tank with clean water, and then empty the water to ensure the tank is clean
of any manufacturing residues. Refill the tank.
• The iron may give off an odour and small amount of vapour when switched on for the
first time. This is normal and will stop as the element cures.
• Press the burst of steam button 3 or 4 times, to prime and flush clean water through
the burst of steam pump.
• Press the cool spray mist button 3 or 4 times, to prime and flush clean water through
the cool spray mist pump.
• Iron an old piece of dampened cotton fabric or linen, to clean the soleplate.
pREpaRaTION
• Check for textile care symbols (
) on items to be ironed.
• Iron fabrics needing low temperatures
first, then those that need medium
temperatures
, and finish with those needing high temperatures
.
TEMpERaTURE SETTING GUIDE
LABEL MARKING TEMPERATURE DOT SETTING
cool - nylon, acrylics, polyester, synthetics •
warm - wool, polyester mixtures, silk • •
hot - cotton, linen •••/ max
do not iron
NOTE: If the instructions on the fabric label differ from this guide, follow the instructions on
the label.
aUTO SHUT-OFF
Auto Shut-off is a safety mechanism to stop the soleplate from heating when the iron is plugged
in and motionless. It does not turn the iron off.
• Theautomaticshut-offdevicewillactivateinthe:
○Uprightposition:Afterapproximately8minutes
○Horizontalposition:Afterapproximately30seconds
• WhenAutoShut-offactivates,6beepswillsoundandtheAutoShut-offindicatorlightwill
ashtoindicatethatthesoleplatehasstoppedheating.MovingtheironwilldeactivateAuto
Shut-off and the iron will reheat to the set temperature.
Loading ...
Loading ...
Loading ...