Loading ...
Loading ...
Loading ...
en Operating the appliance
12
Fill the water tank before each use:
1. Open the appliance door.
2. Remove the water tank from the water tank recess
(picture !).
3. Fill the water tank with cold water up to the "max."
mark. (Picture ").
4. Close the tank cover
until you feel it engage.
5. Insert the filled water tank (picture #).
6. Check whether the water tank is pushed in flush with
the water tank recess (picture $).
7. Close the appliance
door.
The water tank has been filled. You can now start the
operation.
Refilling the water tank
If the water tank is empty, the prompt to fill the water
tank appears on the display. The operation is stopped.
1. Carefully open the appliance door.
2. Remove the water tank and fill it.
3. Slide the water tank back in and close the appliance
door.
4. Start the operation.
The operation continues.
Setting and starting the appliance operation
Example: 15 minutes steaming ‹ at 90 °C
1. Touch the # touch button to switch on the
appliance.
You are taken directly to the steaming ‹ menu.
2. Use the ( or ) button to select the type of heating.
3. Use the & button to navigate to the next line.
4. Use the ( or ) button to select the temperature.
5. Use the & button to navigate to the next line.
6. Press the ( or ) button to change the cooking time.
You are taken to the time-setting options menu.
7. Use the ( or ) button to select the cooking time.
8. Use the 0 button to exit the time-setting options
menu.
9. Touch the # touch button.
The appliance starts the operation.
Notes
■ If you have started the steaming ‹ type of heating,
the cooking time only begins to count down when
the set temperature has been reached.
■ If you open the appliance door during steaming, the
appliance operation stops. After the appliance door
has been closed again, the appliance must first heat
up to the set temperature before the cooking time
continues to count down.
■ If you would like to go directly to the 0 main menu
after switching on the appliance, you can select the
main menu under "Operation after switching on" in
the basic settings chapter.
Default values
The appliance suggests a temperature or setting for
each type of heating. You can accept this value or
change it in the appropriate area.
Heating bar
As soon as a type of heating has started, the heating
bar appears on the display.The heating bar shows the
temperature increase in the cooking compartment.
Note: The temperature indicator is not displayed for the
steaming ‹ type of heating.
2
1
6WHDPLQJ
&
PLQ_V
6WHDPLQJ
&
PLQ_V
PLQ_V
PLQ_V
Loading ...
Loading ...
Loading ...