Loading ...
Loading ...
Loading ...
Cleaning and care
64
Delaying the start time of the Self
Clean program
Start the Self Clean program as
described above and then set the
required finish time within the first five
minutes of starting the program.
Select .
Use the rotary selector to move
the triangle until it appears
under.
appears.
Confirm with OK.
When you turn the rotary selector
clockwise, the finish time will appear in
the display. This is calculated from the
actual time of day plus the duration of
your selected Self Clean program.
Use the rotary selector to select
the required finish time.
Confirm with OK.
The finish time is now saved.
The oven heating switches off.
The finish time can be changed at any
time up until the start time for the
program.
As soon as the start time is reached,
the oven heating and the cooling fan
will switch on. The duration will appear
in the display.
At the end of the Self Clean program
h
, and will appear in the
display.
The door is locked as long as the
symbol is lit up. The symbol will start
flashing as soon as the door lock has
been deactivated.
When the door lock has been
deactivated:
– goes out,
– flashes, and
– short beeps will sound if the buzzer
tone is activated (see “Settings”).
Turn the mode selector to .
Acoustic and visual signals are turned
off.
Danger of burns!
Danger of burns! Wait until the oven
has cooled down before removing
any residual soiling left in the oven
compartment from the Self Clean
program.
Wipe any residues (e.g.ash) left
behind after the Self Clean program
out of the oven compartment. The
amount of ash will vary depending on
how dirty the oven was.
Loading ...
Loading ...
Loading ...