Loading ...
Loading ...
Loading ...
INSTALLING THE PEDESTAL (if desired) (cont.)
Installation Instructions
4
LEVEL THE WASHER OR DRYER
A
Stand the washer or dryer upright. Move it
close to its final location.
B
Make sure that the washer or dryer is level by
placing a level on top. Check side to side and
front to back.
C
Use an open
ended wrench
to adjust the
legs in and out.
Tighten the
lock nut against
the bottom of
the pedestal.
NOTE: To minimize vibration, the locking nuts must
be tight.
6
REMOVE SHIPPING SCREWS
Remove the 4 shipping screws on the back side of the
washer.
5
REINSTALL THE DRAWER
A
Check to be sure the slides are closed.
B
Slide the drawer
into the
opening. Align
the drawer
supports to the
slides on each
side.
C
Reinstall the
original screws
into each
drawer slide.
Tighten both
screws.
D
Open the drawer fully. Slide drawer divider
into slots in the center of the drawer. The
drawer should slide smoothly when you push
it closed.
7
FINALIZE THE INSTALLATION
Refer to the washer or dryer Installation Instructions
to complete the installation.
Drawer
Divider
45
Loading ...
Loading ...
Loading ...