Loading ...
Loading ...
Loading ...
35
REMOVE THE DOOR ASSEMBLY
Remove the side hinge cap by opening the dryer
door and removing the screw from behind the
hinge (#8 x .375” tapping screw). Then using your
hand, pop the hinge cap off the dryer.
Hinge
cap
1
DISASSEMBLE THE DOOR ASSEMBLY
2
Turn the door assembly over and separate the
chrome cover from the inner door. Put the inner
door aside on a soft, protected flat surface.
Lay the door down on a soft, protected, flat surface
so that the inner part faces upward (door resting on
the handle side).
Remove the 7 screws (#10 x 1.125” tapping screws)
located around the perimeter of the door.
7 x A Screws
Installation Instructions
BEFORE YOU START
Unplug the dryer from its electrical outlet.
REMOVE THE DOOR ASSEMBLY (cont.)
1
Close and hold the door, remove the 2 hinge screws
(#10 x 0.75” tapping screws). Pull the door away
from the dryer front panel.
2 x B
Screws
1 x C Screw
REVERSING THE DOOR SWING (if desired)
Loading ...
Loading ...
Loading ...