Loading ...
Loading ...
Loading ...
Introduction 11
Controls and functions
Projector
5. TEMP (temperature) warning
light
Lights up red if the projector's
temperature becomes too high. See
"Installing the dust filter (Optional
accessory)" on page 65 for details.
6. LAMP indicator light
Indicates the status of the lamp. Lights
up or flashes when the lamp has
developed a problem. See "Installing
the dust filter (Optional accessory)" on
page 65 for details.
7. POWER
Toggles the projector between standby
mode and on. See "Starting up the
projector" on page 26 and "Shutting
down the projector" on page 44 for
details.
8. SOURCE
Displays the source selection bar. See
"Switching input signal" on page 33 for
details.
9. BACK
Goes back to previous OSD menu or
exits and saves menu settings when it is
on top level of OSD menu.
10. MENU
Turns on the On-Screen Display (OSD)
menu, exits and saves menu settings.
11. AUTO
Automatically determines the best
picture timings for the displayed image.
See "Auto-adjusting the image" on page
28 for details.
1. Focus ring
Adjusts the focus of the projected
image. See "Fine-tuning the image size
and clarity" on page 29 for details.
2. Zoom ring
Adjusts the size of the image. See "Fine-
tuning the image size and clarity" on
page 29 for details.
3. OK
Selects an available picture setup mode.
See "Selecting a picture mode" on page
36 for details.
Activates the selected On-Screen
Display (OSD) menu item. See "Using
the menus" on page 30 for details.
4. POWER indicator light
Lights up or flashes when the projector
is under operation. See "Installing the
dust filter (Optional accessory)" on page
65 for detail.
1
2
4
5
6
8
9
7
12
12
13
1011
14
14
3
I
I
Loading ...
Loading ...
Loading ...