Loading ...
Loading ...
Loading ...
Power failure/FrostControl display
Ifthe LEDcomesononthecontrolpanel,thismeansthatthe
freezer temperature has risen too high during the last few hours
or days due to a power failure.
IfyoutouchtheALARM icon now, the highest temperature
registered during the power failure will be displayed.
C h e c k t h e q u a l i t yo f t h e f o o d a n d i t s s u i t a b i l i t yf o r c o n s u m p -
tion in case it has become too warm or even defrosted.
The highest temperature will appear for appox. 1 minute. After
that, the actual temperature in the freezer will re-appear.
The display can be switched off by touching the ALARM icon.
Audible warning signal
The appliance is equipped with an alarm function.
Audible door alarm
Ifanappliancedoorisleftopenformorethan60seconds,
the audible warning signal will sound. Touch the ALARM
icon to cancel the alarm. The alarm switches back to
standby when the door is shut.
Audible/visual temperature alarm
Itsoundswhenitisnotcoldenoughinthefreezercompartment.
The temperature display and the
LEDwillalsoflash.
The audible warning device is switched off by touching
the ALARM icon. The temperature display will continue
to flash until the cause of the alarm has been rectified.
This can be caused by:
• thefreezerdoorbeingleftopenforalongtime,allowingwarm
ambient air to enter;
• alongpowerfailure;
• afaultintheappliance.
Ineachcase,makesurefoodhasnotthawedorperished.
SuperCool
Touching the SuperCool icon switches the refrigerator compart-
menttomaximumcooling.Itisrecommendedparticularlyifyou
wishtocoollargequantitiesoffood,drinks,freshlybakedgoods
or meals rapidly.
Switching on: Touch the SuperCool icon briefly so that
theLED
comes on. The refrigerator temperature will
drop to its lowest value.
Note: The SuperCool function uses slightly more energy. After
approximatelysixhours,however,therefrigeratorswitchesback
automaticallytonormalenergy-savingoperation.Ifrequired,the
SuperCool function can be switched off sooner.
Switching off:TouchtheSuperCool iconagainuntil theLED
goes out.
Setup mode
The following functions can be activated in setup mode:
= Sabbath mode
=Childlock
= Confirm water filter change
=Icemakervacationstate
= Water quantity for ice cube tray
= Set BioFresh temperature
=Displaybrightness
=Doorgasketheatingcontrol
=Confirm dust filter cleaning
Activating setup mode
• TouchtheSuperFrost icon for five seconds.
- The SuperFrost LED comes on for 5 seconds,
- after 5 seconds
will flash in the display.
The appliance is in setup mode now.
Youcanselectthesetupmodefunctionsbytouching
the freezer compartment temperature setting icons.
Note
Insetupmodethedisplaywillflashcontinuously.
Exiting setup mode
• TouchthefreezercompartmentOn/Off icon
Theappliancewillchangebacktonormaloperation.
20
Loading ...
Loading ...
Loading ...