Loading ...
Loading ...
Loading ...
GB
Switching the appliance on and off
Youareadvisedtocleantheappliancebeforeswitchingitonfor
the first time (see "Cleaning").
Donotloadwithfrozenfooduntilthetemperatureshowsatleast
-18°C.Therefrigeratorandfreezercompartmentscanbeoper-
ated separately.
Switching off: keep the On/Off icons pressed for approx.
3 seconds.
Temperature display
In normal operation, the following settings
will be displayed:
- the average refrigerator temperature and
- the warmest frozen food temperature.
When starting up for the first time or when the
appliance is warm, dashes will appear until
the temperature reaches a level that can be
displayed (below 0°C in the freezer).
The display will flash:
- if you change the temperature or
- if the temperature rises by several degrees, indicating cold
loss,e.g.ifyouplacefresh,"warm"foodinthefreezerorifyou
removeorre-packfrozenfood,thetemperaturemayrisefora
short time due to warm air flowing into the freez er.
If F1 to F5 appears in the display, the appliance has a fault.
Consult the customer serv ice department indicating the fault
number displayed.
Switching on: touch the On/Off icons (on left
for refrigerator, on right for freezer) so that the
temperature displays light up or flash.
Setting the temperature
The appliance is pre-set for normal operation. We recommend
temperaturesof+5°Cintherefrigeratorand-18°Cinthefreezer.
To reduce the temperature: touch the
Down icon; on left for refrigerator and on
right for freezer.
To increase the temperature: touch the
Up icon.
- While you are entering the temperature, the set temperature
will flash on the display.
- When you touch the temperature setting icons for the first time,
themostrecentsetting("referencesetting")isdisplayed.
- You can change the settings in increments of 1°C by briefly
touchingtheiconsagain.Iftheiconsareheld,thetemperature
setting will change faster.
- Approximately 5 seconds after the last touch, the display will
automatically show the actual freezing or cooling temperature
("actualsetting").
- Youcanchangethetemperatures
in the refrigerator: between 9°C and 3°C and
inthefreezer:between-14°Cand-28°C.
Installing the water filter
1. Remove the cover of the
filtersocket.
2. Insertthefilterandturn
it90°clockwise.
Removing the water filter
3. Turn the filter 90° anti-
clockwiseandremove.
Partition for bottom freezer drawer
Ifrequired,thepartitionsuppliedintheacces-
sories set can be inserted in the bottom
drawer on the left or right.
19
Loading ...
Loading ...
Loading ...