Loading ...
Loading ...
Loading ...
8
ENGLISH
Using the machine for the rst time
When using the machine for the rst time, the following activities need to happen:
1 You need to prime the circuit.
2 The machine will perform an automatic rinse/self-cleaning cycle.
3 You need to initiate a manual rinse cycle.
Circuit priming
During this process, fresh water ows through the internal circuit of the machine
and the machine warms up. This takes a few minutes.
1 Insert a container under the Classic Milk Frother.
2 Press the “ ” button to start the cycle. The machine starts the automatic
priming of the circuit by dispensing some water through the Classic Milk
Frother.
3 When the process is complete, the“ ” and “ ” buttons will ash. The
machine is in the warm-up mode.
Automatic rinse/self-cleaning cycle
When warm-up is completed, the machine automatically performs a rinse/self-
cleaning cycle of the internal circuits with fresh water. This takes less than a
minute.
4 Place a container under the dispensing spout to catch the small amount of
dispensed water.
4219-450-01931 MANUAL GAG. NAVIGLIO HD8749 EN-ES-PT.indd 8 03/12/2018 12:33:07
Loading ...
Loading ...
Loading ...