Loading ...
Loading ...
Loading ...
14
ENGLISH
Adjusting the coee length
The machine allows the amount of brewed espresso coffee to be adjusted
according to your taste and the size of your cups.
Each time the “ ” or “ ” button is pressed, the machine brews a pre-set
amount of coffee. Each button may be individually programmed for a specic brew
setting.
The following procedure describes the programming of the “ ” button.
1 Place a cup under the dispensing spout.
2 Press and hold the “ ” button. The “ ” button and the “ ” light ash
during this phase. Release the button: the machine is now in programming
mode.
The machine starts brewing coffee.
3 When the desired quantity of coffee is in the cup, press the “ ” button.
Now the “ ” button is programmed; each time it is pressed, the machine will
brew the same amount of espresso that was just pre-set.
Espresso and coee brewing
Espresso and coee brewing using coee beans
Before brewing a coffee, check that both the water tank and the coffee bean
hopper are full.
1 Turn the aroma selector switch to select the desired aroma.
2 Place 1 or 2 cups under the dispensing spout.
Note: To program the “ ” coffee brew button, the same steps should be
followed. Press the “ ” button to stop brewing when the desired amount of
coffee is reached.
4219-450-01931 MANUAL GAG. NAVIGLIO HD8749 EN-ES-PT.indd 14 03/12/2018 12:33:13
Loading ...
Loading ...
Loading ...