44341 User Manual

Loading ...

Digital Light Adjustment

The LCD Digital Microscope adjusts to the light digitally through the EV (Exposure Value) adjustment, similar to a digital camera.

Press and hold the MENU button to access the SETTINGS menu. Scroll to the EXPOSURE tab and press SELECT. In the EXPOSURE window, adjust the EXPOSURE UP

(brighter)orDOWN(darker)usingtheNAVIGATIONbuttons.(seeFigure7)

Tip: Viewing a specimen that is very dark in color decreases the amount of light that can shine through it from the BOTTOM illuminator. To correct this, you will need to

increase the exposure setting by switching the illuminators to their highest setting.

Viewing a Specimen

Your digital microscope is equipped with a mechanical stage with adjustment knobs and a self adjusting lever-action holding clamp. (see Figure 8 below)

1. Use the thumb arm on the self adjusting lever action holding clamp to open the clamp.

 2. Placeaspecimenslide(3”x1”/76.2x25.4mmsize)insidetheholderandreleasetheclampingarm,securingtheslideinplace.

3. Use the stage adjustment knobs to position the specimen over the opening in the stage. The rear stage adjustment knob moves the X axis (forward and backward)

whereas the front stage adjustment knob moves the Y axis (side to side).

Note: A vernier scale on both axes allows the exact marking and replication of an object in the eld of view.

Fig. 6

BOTTOM IlluminatorTOP Illuminator

Fig. 7

Fig. 8

Stage Adjustment

Knob - Rear

Stage Adjustment

Knob - Rear

Self Adjusting

Lever Action

Holding Clamp

Loading ...

User Manual - Page 5