Loading ...
Loading ...
Loading ...
E-18
CAUTION
Risk of damage to the floor.
If dust gets tangled in the wheels, the wheels cannot rotate, which may cause wear and
tear and floor damage.
Wheels
Tweezers
Remove tangled dust using tweezers, etc.
Perform maintenance when suction power is weak or when you are concerned about dirt.
We recommend periodic maintenance (about once a month).
Dry Mop Head
Remove tangled dust
Wheels
Crevice nozzle
Crevice nozzle
Brushes
Rotating
sections
Vacuum stuck dust using the crevice nozzle.
Removing stuck dust
Protective filter
Remove the protective filter
from the handy cleaner handle
1
Gently press and wash with water.
2
Protective filter
Handy cleaner handle
Protective filte
r
Tap to remove excess water
and air dry it for approx. 12
hours. (The drying time varies
depending on the
environment and the season)
After it dries, attach it to the
handy cleaner handle.
Do not use cleansers, bleach, etc., and do not wash using a washing machine. Also, do not dry it with hot
air such as that from a hair dryer. This may cause a deterioration in performance, damage, or deformation.
Gently remove the dust stuck inside before washing with water.
Do not use a brush other than the supplied maintenance brush. Doing so may cause damage.
After washing the filters with water, thoroughly air dry them before attaching them.
Using filters while still wet may cause rapid filter clogging, poor suction and abnormal odors.
Attach the dust case and filters before operation.
If any dust enters the motor, the filter inside the cleaner may be clogged and an abnormal sound may be
generated from the cleaner. In that case, consult with the Hitachi authorized service agent.
If the vacuum power is weak even after washing the filters with water, the clean filter, etc. may be worn.
To request replacement, please consult with the Hitachi authorized service agent.
Note
Maintenance
Loading ...
Loading ...
Loading ...